Best Scrape Box and Blade Implement for Tractors

Box Blade Tractor

Choosing a Scrape Box and Blade Implement? We created this guide, so you can find the best Scrape Boxes and Blade Implements on the market.

We’ve analyzed all the Scrape Boxes and Blade Implements on the market, looking at reviews, cost, ease of purchase, and many other factors.

Thus, we have compiled a ranking of the best Scrape Box and Blade Implement.

Box Scraper

Scrape Box and Blade Implement: In a nutshell

  • The box blade or leveler is one of the most useful tools you can attach to your tractor.
  • You can use it to level the ground, repair or maintain gravel driveways, rip and move dirt, or dig a ditch.

What is Box Blade For Tractors?

Used for shaping soil, a box blade is a 3-sided rectangular metal device that attaches to your tractor. It is mainly used to spread material such as soil or gravel.

You can use it to grade, level, or backfill part of your property. You can use it for driveways, spreading mulch, clearing snow, or leveling a construction site. Your machine can come with scarifies, which are metal tines angled down at the top of the box. They can dig into hard soil and break it up, so it can be scattered.

Some tips for using a scraper blade

The scraper blade is usually mounted on the tractor’s three-point hitch and is wide enough to pass the tires on both sides after it has been mounted at a slight angle.

1. Swath angle.

When you’re clearing the road or the middle of a parking lot, it’s important to remember to angle the blade so that the snow rolls to one side. If you try to keep the blade straight, the snow will eventually start moving both ways, but the weight you will have will definitely interfere with your work. If you tilt the blade, the snow will roll to the side, reducing the weight and the center path.

2. Forward and backward

You need to know when to go forward and when to go backward. The scraper blade can be rotated 180 degrees, allowing you to rake snow on short runs rather than drag it on longer stretches. If you’re clearing parking spaces, reverse will be your best bet, if you’re clearing the road, a long run in front gear will probably work better.

3. Offset

If you find yourself digging close to the road, whether it’s snow, or other material, use the offset function. The offset feature allows the scraper blade to shift off-center behind the tractor so you don’t have to put the tractor in the mess you’re cleaning up.

4. Know the weight of the snow

Most people think of snow as beautiful and fluffy, and don’t think of it as the thick, heavy mess it becomes when it is scraped off. One cubic foot of snow can weigh up to 20 pounds, and that’s only a fraction of what your tractor will pull. Understand that it only takes your tractor a few seconds to handle a few hundred pounds of whiteout, so be careful.

5. Reduce speed

Since the entire ground will be covered with snow, you won’t be able to see obstacles lying just below the surface. Even a small crack in the concrete can damage your blade or tractor if you go too fast, reducing your speed.

Best Scrape Box and Blade Implement

4 FT Box Scraper by Rancher Supply

4 FT Box Scraper by Rancher Supply

Features:

  • Cat-1 box scraper features a ¼” steel construction for even the most demanding jobs.
  • This 3pt quick hitch attachment is recommended for tractors with horsepower up to 28 HP 2 WD & 20 HP 4 WD.
  • Fits most Category 1 tractors.
  • The tractor hitch attachment features two reversible cutting edges, adjustable scarifier heights, and replaceable shanks.

The 4 FT Box Blade Scraper is an essential tool for anyone with a tractor. The 4 ft model can handle a variety of landscaping, gardening, and farming tasks. It can easily move dirt, backfill holes, spread soil, level, and grade land. Hardened steel tips ensure that the scarifier shanks can easily penetrate compacted soil. Scarifier heights are adjustable, so you can loosen the soil, or you can smooth out the soil by raising them out of the way.

Black Boar ATV/UTV Scrape Blade Implement

Black Boar ATV/UTV Scrape Blade Implement

Features:

  • Adjusts 0, 7. 5 or 15 degrees either direction.
  • Parallel linkage design maintains proper implement angle as it is lowered.
  • Lightweight design is easy to install with one person and minimizes interference with maneuvering.
  • Superior range of motion without having to move pins or manually drop the hitch.
  • Made of durable steel with a streamlined, minimalist design.

MotoAlliance Impact Implements CAT-0 Box Scraper

MotoAlliance Impact Implements CAT-0 Box Scraper

Features:

  • Six (6), adjustable and replaceable cutting edge (ripper) tines.
  • Five (5) inches of adjustability on the cutting tines.
  • Requires CAT-0 system (not included) installed on the machine.
  • Integrated 3 Point CAT-0 quick-mount.
  • Reversible and replaceable blade wear bar.

Agri-Fab Ground-Engaging Attachment Sleeve Hitch Scraper Box

Agri-Fab Ground-Engaging Attachment Sleeve Hitch Scraper Box

Features:

  • Requires sleeve hitch for operation; consult tractor manufacturer for sleeve hitch.
  • 42″ working width for quick coverage of most tracks and driveways.
  • 3/16″ steel blade for hardworking, hard-wearing strength.
  • 30-degree angle adjustment. Assembled Product Size: 27 x 45 x 18 (inches).

Brinly BS-381-A Sleeve Hitch Tow Behind Box Scraper

Brinly BS-381-A Sleeve Hitch Tow Behind Box Scraper

Features:

  • Heavy center-mounted C-frame and carbon steel construction guarantee use year after year.
  • Ideal tool for landscaping, gardening, and other yard projects.
  • 38-inch working width easily maneuvers through tight spaces.
  • Side plates and scarifier bar can be easily removed from the box scraper to make a rear blade, ideal for grading, backfilling, or moving materials like dirt, snow, and gravel.

Box Scraper Buying Criteria

The box grader, while versatile, still requires a big investment, so here’s what you should look at to make sure you’re getting what’s worth your money.

Durability

This is the piece of equipment you’re going to haul around on the ground, so you need to make sure it’s made of high-quality materials so that it lasts for years to come. You need a sturdy steel frame with solidly welded joints, and the hinges need to be sturdy so that your box doesn’t break the minute it hits a stubborn weed. You’ll also need sharp teeth, preferably heat-treated steel, and the edges should be carbon steel. Finally, the paint should be UV resistant, since it will be used in direct sunlight.

Compatibility with your tractor

The box blade can’t work by itself. You need to tow it behind your tractor or ATV, so you need to make sure it will work with your tractor. It also needs to be wider than your tires. Check your owner’s manual to see what category of tractor and hitch the tool is connected to.

Width

The width of the box is also an important parameter. Before choosing a box blade, make sure that its width is slightly greater than the diameter of the tractor’s rear wheels. Also, make sure you have removable and reversible scraper blades. It would even be much better if they had offset slots.

Multifunction

The box blade is designed for multiple purposes, so look for features that make it even more versatile. There are models with interchangeable and reversible blades. You may also want adjustable blades so you can tilt them.

Price

A hydraulic box mower blade can do a lot with your lawn, but it will be an investment. Quality and cost tend to go hand in hand, so if you want the best machine, be prepared for the price. With all that said, it’s still cheaper in the long run than constantly renting a machine every time you need a leveling blade or grader scraper.

Using a box blade: the basics

The box blade with scarifiers is a three-sided metal box with front and rear scraper blades located at the bottom of the back panel. It is used primarily for spreading material such as soil or gravel, and for grading, leveling, or backfilling an extensive area of land for a driveway, lawn, garden, construction site, etc. Scarifiers are angled metal tines mounted in a row on a crossbar. across the top width of the box blade. They are often available with interchangeable steel tips. When they are locked in their working position, they dig in and break up the hard soil so they can be shaped to your desired shape.

It takes practice, practice, and practice again to become proficient at using a box blade.

You may be a little clumsy at first, but after a few projects, you will gain skill and confidence. So start with something simple that doesn’t require the use of scarifiers, spreading a bunch of dirt or gravel. Then you’ll be ready to break up an uneven surface with scarifiers, clearing and moving the soil, spreading it out until the area is level or sloped for drainage, depending on your needs.

Here are some basic tips to keep in mind:

  • Always read the Operator’s Manual before operating any equipment and follow all operating and safety instructions.
  • For scraping, adjust the top link so that the front and rear cutting blades barely touch the ground. This will provide the main cleaning and smoothing action. For more aggressive scratching, shorten the top link so that the box blade is tilted slightly forward.
  • Use the scarifiers to break up any ground you want to level. It could be a bump in a long driveway, a large bump in an area you want to level, or perhaps an area of hard pavement that is not draining properly. Go over it with the scarifiers in the down and locked position and your box blade tilted slightly forward, shortening the top pull. Work the area well, loosening the soil thoroughly. Then move the scarifiers to the upper position, level the box blade, and work the loose soil to level or shape it.
  • To level the area you were working with, make sure the box blade is on the ground and level from side to side, then extend the top pull so the box blade is slightly tilted up. Then set the 3-point to the “floating” position. Because the 3-point blade does not exert pressure on the ground, the blade of your box will now float on the surface of the ground. When it is slightly tilted upward, the inner blade will not touch the ground, and the rear blade will smooth the soil as you drive over it.
  • Every time you fill a depression or hole with loose soil, you need to compact it. Drive the tractor’s rear wheels over the area several times and it should do the trick. Then add and tamp the soil as needed.

Scrape Box and Blade Implement Price:

Scrape Blade Implement under $1200:

  • 4 FT Box Scraper by Rancher Supply.

Scraper Box under $500:

  • MotoAlliance Impact Implements CAT-0 Box Scraper.

Scraper Box under $400:

  • Agri-Fab Ground-Engaging Attachment Sleeve Hitch Scraper Box;
  • Brinly BS-381-A Sleeve Hitch Tow Behind Box Scraper.

Scrape Blade under $200:

  • Black Boar ATV/UTV Scrape Blade Implement.

FAQ about Box Blade

What are the uses of a box blade?

Ideally, box blades are often used for spreading things. For instance, you can use it to spread the gravel in your driveway or soil when working in the fields. You can also use them for leveling, backfilling a piece of land, or even grading. They are mostly used on driveways, construction sites, gardens, and lawns, among other areas. Sometimes they come with scarifiers attached to them to allow for more uses.

How do you use a box blade?

Well, there are several things that a box blade can do. However, the most common use is to scrap. For basic scrapping, you only need to adjust the top link. This will leave both the front and rear blades touching the ground to help you with your task. For more advanced work, the top link should be shortened so that the blade will tilt forward. You can also use the scarifiers to help you break the ground.

What are the advantages of using a box scraper?

There are several reasons why you would want to use a box scraper. First, the box design makes it a suitable tool when it comes to moving materials over a distance. It also comes with some adjustable teeth in the front to help you with the ripping. You can also use it for backfilling, leveling, and grading, as well.

David West
Rate author
Rakepick - All about the rake: how to choose, what to look for and where to buy